Out of stock
|
The Mighty Mule FM352 is the only gate opener that has the motor and control board combined into one component.
- Gate Materials: Light Wood, Light Steel, Aluminum, Vinyl, Chain Link, and others.
- Weight and length: Up to 12' in length and 550 lbs per leaf
- Max degree of opening: 110 degrees
- Gate Post or Column size (pull to open): Max 4" x 4" post or gate mounted 2" from the rear face of a column.
- Push to Open: Yes (bracket purchased separately) - setback above does not apply to push to open.
- Solar Compatible: Yes, browse our
solar panels (purchased separately).
- Power: Battery (Not Included) and Low Voltage Trickle Charge (Included)
- Power Wire Specification: 16 gauge wire (purchased separately) with 1,000 foot max length from transformer to control board.
- Operating Temperature: -5 ºF to +160 ºF
|
|
|
|
|
GateCrafters.com offers more expert assistance than anyone. If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
|
|
|
|
|
|
The Mighty Mule FM352 dual Opener can be used in residential applications including automating gates made of farm tubing, steel, aluminum, wood, and chain link, along with many other gate types. This opener can be set on the left or right and is used in the standard pull-to-open operation. By adding the push-to-open bracket accessory (not included) the Mighty Mule FM352 can be used to push the gate open away from the property with the arms still mounted on the inside. The FM352 opens to 110 max on each side. Both arms can be adjusted individually upon installer preference.
The Mighty Mule FM352 dual Opener is a low voltage system, eliminating the need to run 110 AC to your gate. Simply run 16-gauge low voltage to a household outlet within 1000' of the operator or use a solar panel. The Mighty Mule FM352 runs off of a deep cycle marine battery (battery and housing for battery not included). The large battery allows for a large storage capacity of cycles (Provides up to 1,500 back-up cycles with fully charged battery). This unit also does not have a control box. All the controls of the unit are housed directly in the arm itself, consolidating space and less stuff to mount.
The Mighty Mule FM352 dual Opener can be used with GTO Inc.'s complete line of accessories including keypads, transmitters, exit wands, gate locks, solar panels, and more.
|
|
|
|
|
GateCrafters.com is the DIY factor. GateCrafters.com further adds to most of our gate openers for easier DIY installation. We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener. In addition we have the largest staff of factory trained technicians in the US.
|
|
|
|
|
|
Included with Gate Opener from Manufacturer
|
Top of Page
|
- 1) Transmitter
- Receiver
- Mounting Hardware
- Charging transformer
|
- 2) Operator Arms with cables and control boards
- Control board and box
- UL325 certified
- Installation Video
- Spanish Manual
|
|
|
Gate Crafters.com Exclusive Product & DIY Additions
|
Top of Page
|
|
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock all replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
|
|
|
|
|
GateCrafters.com has actual experience. We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories. All these factors are what have lead to us having so many exclusive additions. When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
|
|
|
|
|
|
|
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by GateCrafters, however, most tools are available at local hardware stores for purchase or rental.
- Center Punch
- Open End Wrenches, 3/8", 7/16", 1/2", and 9/16"
- Small (Flat Bladed) Screwdriver
- Tape Measure
- Level
- Wire Strippers
- Phillips Screwdriver/ Large
- C-Clamps - small, medium, and large
- Power Drill
- 3/8" Drill Bit
- Hacksaw or Heavy Duty Bolt Cutters
- Extra person will be helpful
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
|
|
Words from Senior Application Engineer, Anthony Gaeto
|
Top of Page
|
"The Mighty Mule FM352 is a part of the latest releases from GTO inc. GTO inc. has once again created a price point gate opener that stands out. The Mighty Mule FM700 has been widely used for over a decade with a dedication to dependability and quality. They have taken that reputation and asked consumers to apply that same level of loyalty to this new opener. The Mighty Mule FM352 is highly geared towards solar usage.
The unique design of this opener allows it to be very effective for solar use and also easy installation. There is no battery or control box that comes with the unit and there is a very good reason for that. The lack of a control box is because the board is housed within the arm, something never before done in gate openers. This just takes one more step out of the installation process. The lack of a battery is because it runs off a deep cycle marine battery and with the size and weight of the battery needed, if we shipped it to you the price for shipping and the battery would well exceed what the actual cost of the battery should be. They are easy to find though, most chain stores carry them including most Wal-Marts. The deep cycle marine battery is great for solar usage, a huge number of cycles can be stored and used during night and cloudy days, leaving you running at all times.
Even though this is an easy to install DIY gate opener GateCrafters.com is still available for any installation or technical support the installer may need. Gate Crafters has years of experience with GTO inc. openers as well as many other brands and accessories and is readily available 7 days a week, 9am to 9pm eastern time just by calling our number: 1 800 537-4283.
GateCrafters.com is dedicated to getting the right gate opener for your gate. As more gate openers are being made economically feasible and easy to maintain, the selection is going to grow ever wider. That's where GateCrafters.com comes in. We have extensive amounts of educational material on our website to help you become an informed consumer. We also have our factory-trained representatives standing by to answer all your gate and gate opener questions and match the perfect opener with your gate. The combination of our customers' passion for home improvement and GateCrafters.com's wealth of knowledge is a perfect match and cannot be duplicated."
|
|
As part of one of GateCrafters.com's constant quality checks and knowledge updates. I personally go to visit the factories in which the products we sell are made. I made 6 visits to the GTO Inc. US facility, most recently in Februrary 2009. My visits accumulated a considerable period of time visiting because they were not only to tour the facility and meet employees, but also for authorized factory training. During training I received a certificate (Click here to view) and a score of 100% on the Factory Certified training exam.
|
|
All submissions receive a FREE Multimeter. Email them to customerphotos@gatecrafters.com.
Below you will see customer photos of the Mighty Mule FM352 or FM250 - (FM 352 predecessor).
|
| Click Images Below to View Larger and Learn More |
Manual: FM352 Mighty Mule auto gate openers QB ID: FM352
|
|
|