|
The Liftmaster IHSL24UL 24VDC Heavy-Duty Industrial Single Slide Gate Operator features a brushless DC motor capable of continuous-duty.
Operator speed is variable from 0.5 ft/sec. to 1 ft. sec with soft start/stop. The IHSL24UL's recommended capacity is rated for gates up to 90 ft. in length and weighing up to 5,500 lb. Has a strong metal housing for protection against vandalism.
|
GateCrafters.com offers more expert assistance than anyone.
If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
|
The Liftmaster IHSL24UL 24VDC Heavy-Duty Industrial Single Slide Gate Operator
Reliable
The INSL24UL control board has onboard status LED’s that indicate the status of the operator. The quick close feature prevents unauthorized access which stops vehicles from tailgating. Operator is protected by an outdoor rated (NEMA 3R), 12 ga. steel, weatherproof cabinet.
The security+ 2.0 receiver can handle up to 50 remote controls to be programmed to the operator.
Powerful
This operator is powered by AC by default and the operator kit includes (2) 12 Vdc, 7AH batteries. The built-in battery backup feature provides standby power during an outage. In AC power mode, batteries are charged in the circuit by the integrated transformer and only require the included (2) 12 Vdc batteries to be installed.
Solar
Solar panels (not included) can also be used to deliver power to the operator and panels can be wired for either 120 Vac or 240 Vac. The included 7AH batteries are only suitable for AC and power standby modes. For solar panel installations (2) 33AH batteries (not included) are strongly recommended for optimal solar performance and must be facing north.
Solar application requirements accommodate a minimum of (2) 10 Watt solar panels up to a maximum of (6) 10 Watt solar panels.
*The 33AH application requires battery harness K41-0102-000. The use of photoelectric sensor heaters are not recommended in solar applications.
Safe
The INSL24UL is UL listed with advanced sensors and monitored safety protection devices that are tested together to deliver a secure system.
The Liftmaster S505AL monitored small profile resistive edge and LMRRUL monitored retro-reflective photo eye are included with the INSL24UL to provide the entrapment protection which is required for slide gate applications.
*A minimum of two independent monitored entrapment protection devices are required to be installed according to the UL 325 Entrapment Protection Requirements.
Monitored
The myQ Smart Facility Access cloud based solution keeps you up to date and in control of all of the facility’s access points. The ultimate operator for environments such as manufacturing, transportation, municipality, utility, and warehouse locations. Managers with access to the myQ Facility Management Application can monitor entrance and exit access in real-time and track current open/close gate status. This additional feature uses internet connectivity to control the gate from anywhere.
*Requires additional internet gateway unit.
|
Sync
-Synchronizes gate operation and eliminates costly trenching; set speed independently if needed.
UL Listed
-Tested to the most stringent UL 325 industry guidelines. External entrapment protection devices need to be added to meet UL 325 standards. Your Installer will recommend suitable entrapment protection devices for your installation, such as photoelectric or edge sensors.
Gate Safety Sensors
-Protect people entering or leaving your gate with safety sensors that stop the gate from closing on obstructions.
Safety Reversing
-When detecting an obstruction the gate reverses with the inherent reversing sensor and the included monitored safety accessories.
Quick Close Feature
-Prevent unauthorized access with quick close feature that stops vehicles from tailgating.
Manual Disconnect
-Allow Unlocked gates to be opened manually with manual disconnect feature.
Gate Battery Backup
-Get in and out when the power's out with battery backup.
|
|
GateCrafters.com has the resources you need.
How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question.
We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
|
Usage Classification: Class II, III, and IV
Main AC Supply: 120 Vac, 13 Amps including accessory outlets -or- 240 Vac, 3.7 Amps
System Operating Voltage: 24 Vdc transformer run/ battery backup
Accessory Power: 24 Vdc, 1 A max for ON + SW (switched)
Solar Power Max: 24 Vdc at 60 Watts max.
Maximum Gate Weight: 5,500 lbs. (998 kg)
Minimum Gate Travel Distance: 4 feet (1.2 m)
Maximum Gate Travel Distance: 90 ft (21.34 m)
Maximum Gate Travel Speed: 1 ft./sec
Maximum Daily Cycle Rate: Continuous for line voltage, not for solar
Maximum Duty Cycle: Continuous
Temperature Specifications (with Optional Heater): -40°C to 60°C (-40°F to 140°F)
Temperature Specifications (without Optional Heater): -20°C to 60°C (-4°F to 140°F)
*Liftmaster recommends professional installation and only supports products that are being installed or serviced by a professional installer.
For installations that are purchased on Gatecrafters.com we can support installation, general troubleshooting, and warranty assistance directly.
|
Included with LiftMaster IHSL24UL Single Slide Gate Opener:
(1) Operator Front
(1) Operator Back
(1) Installation Manual
(2) Warning Signs
(2) 12 Vdc 7AH Batteries
(2) Gate Brackets
(4) Clamps
(1) Hardware Bag
(1) Eye Bolt kit
(1) Chain #50- 25 ft w/ Master Link
(1) S505AL- 5 ft Edge Sensor
(1) LMRRUL- Monitored Retro Reflective Photo Eye
(2) Free LiftMaster Remotes
Items included when you choose second purchase option above:(1) CAPXS- Smart Video Intercom– S(2) Free Remotes
|
|
For over a decade GateCrafters.com has been the premier online retailer of gate openers and gate opener accessories. Because of our extensive technical and installation knowledge, we are authorized to sell to the DIY market. If you purchase a LiftMaster gate opener system from GateCrafters.com and install it yourself, your warranty eligibility will be recognized by LiftMaster and supported by GateCrafters.com. You can access our trained technical staff 7 days a week from 9 am to 9 pm, EST. The LiftMaster gate opener can be installed with simple household tools and do not require any specialized tools. Wiring required for the installation is simple and straightforward as it is all low voltage wiring.
When you DIY install your gate opener system, you will save $1000s of dollars over the life of your gate opener. You will have working knowledge of your gate opener installation and how the gate opener works. This will make it easier for you to troubleshoot your system and perform routine maintenance, if needed in the future.
|
|
GateCrafters.com is the DIY factor.
GateCrafters.com further adds to most of our gate openers for easier DIY installation.
We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener.
In addition we have the largest staff of factory trained technicians in the US.
|
|
Products:
(2) LiftMaster Dual-button Transmitters (811LM)
Attention: LiftMaster Gate Openers do not come with any remotes from the factory or most other retailers. We give you (2) FREE LiftMaster remotes to work with the built in receiver
DIY Additions:
Order specific customized accessory wiring instructions
360 degree accessories - we can take you through exit, entry, safety, power, and all other minute details to create a fully rounded kit.
Free 24/7/365 Installation Support
Free 7 day/week Technical Support
Largest Number of Certified Techs in America
Free assistance to find the right gate opener for your gate
Free systems design assistance to match the right accessories to fit your needs.
Extremely competitive pricing
Free shipping on all accessories purchased with a gate opener
We stock replacement parts
Many brands of many types of accessories, enough to handle just about any operational situation you can imagine
|
GateCrafters.com has actual experience.
We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories.
All these factors are what have lead to us having so many exclusive additions.
When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
|
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by GateCrafters, however, most tools
are available at local hardware stores for purchase or rental.
Please refer to manual for Tools Needed.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
|
|
Words from Senior Application Engineer, Anthony Geato
|
Top of Page
|
|
Liftmaster/Chamberlian's domestic operations are located in Elmhurst, IL and maintains a wide reaching branch of international offices. Its manufacturing has been in
Mexico for more than 20 years. In business for over 100 years this company is well known for its garage door, gate operators and other access oriented innovations.
|
Manual: LiftMaster IHSL24UL, INSL24UL Installation Manual
Manual: LiftMaster IHSL24UL Data Sheet
QB ID: IHSL24UL
|