• Designed to be a quick and easy installation process
• Powered by 1.5V AA lithium batteries which provide about 3-4 years of battery life
• Small and compact dimensions (4.72 x 4.72 x 1.18)
• Range of up to 50 meters
• Static load capacity 2500kg (5500 lbs.)
• Highly secure
• Low power consumption
• Non permanent installation
• High security 128-Bit AES encryption

• Use on a 14 Concrete Saw (3/4"-71" Arbor)
• 3/16th Wide

• Sold by the case (12- 30oz tubes)
• Seals up saw cuts in your driveway

• GTO 6' x 12' w/ 50' Lead Pave Over Loop Wire for Exit

• Compatible with gate openers sold on Gate Crafters
• Use under concrete, asphalt, pavers, or gravel roads
• UL 493 Direct burial rated loop wire
• Pre-phased at the factory
• Loop kit includes cable ties, ground stakes, and loop lead-in labels
• 100 feet of lead

• Compatible with gate openers sold on Gate Crafters
• Use under concrete, asphalt, pavers, or gravel roads
• UL 493 Direct burial rated loop wire
• Pre-phased at the factory
• Loop kit includes cable ties, ground stakes, and loop lead-in labels
• 60 feet of lead

• Only compatable with Chamberlain Elite Gate Operators
• Use as center loop detector, exit loop detector or hold open loop detector
• Use with the OmniControl Board

• Checks Safety & Exit Loops Functionality
• Compact Design
• Green Light/Red Light Indicators
• No Battery Replacement Needed

• Compatible with gate openers sold on Gate Crafters
• For installation in asphalt or concrete 3/16 saw-cut groove
• Custom designed polyethylene wedge shaped jacket with wings. (built in backer-rod)
• Pre-phased at the factory
• Loop wire jacket and lead-in jacket are the same size
• Pre tested at factory 3 ways
• 100 feet of lead

• Compatible with gate openers sold on Gate Crafters
• For installation in asphalt or concrete 3/16 saw-cut groove
• Custom designed polyethylene wedge shaped jacket with wings (built in backer-rod)
• Pre-phased at the factory
• Loop wire jacket and lead-in jacket are the same size
• Pre tested at factory 3 ways
• 50 feet of lead

• Compatible with gate openers sold on Gate Crafters
• Use under concrete, asphalt, pavers, or gravel roads
• UL 493 Direct burial rated loop wire
• Pre-phased at the factory
• Loop kit includes cable ties, ground stakes, and loop lead-in labels
• 40 feet of lead

• Use on a 7 or 7 ¼ Circular Saw (5/8"-7/8" Arbor)
• 3/16th Wide

• Easy to install and setup
• 10 sensitivity settings
• Lightning and surge protection
• 4 operating frequencies
• UltraMETER™(displays optimum sensitivity setting / diagnostic aid)

• Specifically designed for solar powered gate applications
• Use as safety loop detector, exit loop detector or shadow loop detector
• Use with a preformed loop or make your own
• Compact, fits in almost all control boxes

• Low voltage: 10V to 30V AC/DC
• LOOP Inductance: 20μH to 1500μH (including lead-in inductance)
• Operating temperature: -35℉ to 165℉(-37℃ to 74℃)
• Operating Voltage: 10.5 volts to 30 volts AC or DC @ 35 milliamps
• Output Rating; 1 amp @ 125 volts AC general use, 1 amp at 30 volts DC
• Size dimensions: 1.40"(H) X 1.40"(W) X 2.75" (D)

• Low voltage: 10V to 30V AC/DC
• 20μH to 1500μH loop inductance (including lead-in inductance)
• Operating temperature: -35℉ to 165℉(-37℃ to 74℃)
• Output relay rating of 3 amp @ 300 volts AC and 150 volts DC
• Size dimensions: 2.36in.(H) X 1.75in.(W) X 3.92in.(L)

• Sold in Sets of 1 at 30oz
• Seals up saw cuts in your driveway

• Can be used as an exit loop, safety loop or center loop
• 8 sensitivity settings
• Designed for LA400PKGU, LA500PKGU, LA5001PKGXLMU, LA412PKGU, RSW12U, RSL12U, CSW24U, CSL24U, SL3000501U, SL3000101U, SL585, SL595, CSW200501U & CSW200101U

Quick Facts: 

• Solar-powered
• Wireless - no wiring needed
• 433.92 MHz (65 ft. range)
• Detects vehicles magnetically
• IP67 weatherproof
• Easy bolt-on install
• Low maintenance