Gate Opener Accessories - Safety Devices

Do you want underground loop sensors (saw cutting or concrete pouring may be necessary) or above ground inferred sensors?

Support

Accessories are the final step in turning an automated gate into a well-designed system. CLICK HERE>> to read more.

Driveway Sensor

Loop driveway sensor products are favorites of commercial locations because they cannot be interfered with by people or cars, where inferred sensors can be knocked out of alignment. However inferred driveway gate sensors are much easier to install and tend to be a favorite of residential DIY installers.
Gate Crafters Safety Infrared Sensor

Gate Crafters Safety Infrared Sensor "The Safety Egg" (BS-IR30)

Quick Facts:
  • 30' Range
  • 12/24 DC or AC voltage
  • Egg Shape helps to deflect rain and snow


$49.95
EMX IRB-RET Universal Safety Retroreflective Photoeye

EMX IRB-RET Universal Safety Retroreflective Photoeye

Quick Facts:
  • Type B1, non-contact sensor
  • UL 325-2016 compliant
  • Operating range up to 60 ft. (18.3 m)
  • Compatible with many operators


$160.00


NIR-50-325 Safety Photo Eye with Adaptor

Quick Facts:
  • For NICE/Apollo control boards only


$220.00


GateCrafters Safety Pad Lock

Quick Facts:
  • Lock gate opener arms to the gate
  • Lock the pin on an automatic gate lock
  • Lock existing push buttons


$2.00


Liftmaster Safety Monitored Wireless Edge Kit

Quick Facts:
  • Innovative Edge Kit
  • Protects up to 8 entrapment points
  • Receiver accepts up to 4 transmitters
  • Bluetooth® transmission up to 130 ft. range


$180.00
FAAC Photobeam Photoelectric safety sensor 785105

FAAC Photobeam Photoelectric safety sensor 785105

Quick Facts:
  • Angle of detection: +/- 4 degrees
  • Range: 100 ft.
  • Response Time: 10ms
  • Power Supply: 24VDC


$145.25


EMX NIR-50 Retro-Reflective Photoeye

Quick Facts:
  • Extended range of 50 feet
  • Low current draw: an excellent choice for solar and low voltage applications
  • Install Hardware Included
  • Reversing sensor for residential and commercial gates


$89.95


EMX NIR-50-325 Safety Photo Eye

Quick Facts:
  • 50 foot operating range
  • Compact size
  • Adjustable sensitivity
  • Weatherproof, IP66 enclosure
  • UL 325 compliant safety exit device


$120.00
LiftMaster LOOPDETLM Vehicle Safety Plug-In Loop Detector

LiftMaster LOOPDETLM Vehicle Safety Plug-In Loop Detector

Quick Facts:
  • Can be used as an exit loop, safety loop or center loop
  • 8 sensitivity settings
  • Designed for LA400PKGU, LA500PKGU, LA5001PKGXLMU, LA412PKGU, RSW12U, RSL12U, CSW24U, CSL24U, SL3000501U, SL3000101U, SL585, SL595, CSW200501U & CSW200101U


$149.00
EMX Ultra II D-TEK Plug In Style Vehicle Safety or Exit Loop Detector

EMX Ultra II D-TEK Plug In Style Vehicle Safety or Exit Loop Detector

Quick Facts:
  • Easy to install and setup
  • 10 sensitivity settings
  • Lightning and surge protection
  • 4 operating frequencies
  • UltraMETER™(displays optimum sensitivity setting / diagnostic aid)


$88.25


DSP-10-LVSA Diablo Control Safety or Exit Loop Detector

Quick Facts:
  • Low voltage: 10V to 30V AC/DC
  • 20μH to 1500μH loop inductance (including lead-in inductance)
  • Operating temperature: -35℉ to 165℉(-37℃ to 74℃)
  • Output relay rating of 3 amp @ 300 volts AC and 150 volts DC
  • Size dimensions: 2.36in.(H) X 1.75in.(W) X 3.92in.(L)


$78.75


DSP-11 LV Diablo Control Safety or Exit Loop Detector

Quick Facts:
  • Low voltage: 10V to 30V AC/DC
  • LOOP Inductance: 20μH to 1500μH (including lead-in inductance)
  • Operating temperature: -35℉ to 165℉(-37℃ to 74℃)
  • Operating Voltage: 10.5 volts to 30 volts AC or DC @ 35 milliamps
  • Output Rating; 1 amp @ 125 volts AC general use, 1 amp at 30 volts DC
  • Size dimensions: 1.40"(H) X 1.40"(W) X 2.75" (D)


$87.95


Diablo Controls Safety or Exit Loop Detector (DSP-6LP)

Quick Facts:
  • Specifically designed for solar powered gate applications
  • Use as safety loop detector, exit loop detector or shadow loop detector
  • Use with a preformed loop or make your own
  • Compact, fits in almost all control boxes


$120.00
Chamberlain Elite Safety or Exit Loop Vehicle Detector

Chamberlain Elite Safety or Exit Loop Vehicle Detector

Quick Facts:
  • Only compatable with Chamberlain Elite Gate Operators
  • Use as center loop detector, exit loop detector or hold open loop detector
  • Use with the OmniControl Board


$158.00
BD Loops PreFormed Direct Burial Safety or Exit Loops w / 40 Ft. Lead

BD Loops PreFormed Direct Burial Safety or Exit Loops w / 40 Ft. Lead

Quick Facts:
  • Compatible with gate openers sold on GateCrafters
  • Use under concrete, asphalt, pavers, or gravel roads
  • UL 493 Direct burial rated loop wire
  • Pre-phased at the factory
  • Loop kit includes cable ties, ground stakes, and loop lead-in labels
  • 40 feet of lead


$90.00
BD Loops PreFormed Saw-Cut Safety or Exit Loops w / 50 Ft. Lead

BD Loops PreFormed Saw-Cut Safety or Exit Loops w / 50 Ft. Lead

Quick Facts:
  • Compatible with gate openers sold on GateCrafters
  • For installation in asphalt or concrete 3/16 saw-cut groove
  • Custom designed polyethylene wedge shaped jacket with wings (built in backer-rod)
  • Pre-phased at the factory
  • Loop wire jacket and lead-in jacket are the same size
  • Pre tested at factory 3 ways
  • 50 feet of lead


$104.00
BD Loops PreFormed Direct Burial Safety or Exit Loops w / 60 Ft. Lead

BD Loops PreFormed Direct Burial Safety or Exit Loops w / 60 Ft. Lead

Quick Facts:
  • Compatible with gate openers sold on GateCrafters
  • Use under concrete, asphalt, pavers, or gravel roads
  • UL 493 Direct burial rated loop wire
  • Pre-phased at the factory
  • Loop kit includes cable ties, ground stakes, and loop lead-in labels
  • 60 feet of lead


$92.00
BD Loops PreFormed Direct Burial Exit Loops w / 100 Ft. Lead

BD Loops PreFormed Direct Burial Exit Loops w / 100 Ft. Lead

Quick Facts:
  • Compatible with gate openers sold on GateCrafters
  • Use under concrete, asphalt, pavers, or gravel roads
  • UL 493 Direct burial rated loop wire
  • Pre-phased at the factory
  • Loop kit includes cable ties, ground stakes, and loop lead-in labels
  • 100 feet of lead


$152.00
BD Loops PreFormed Saw-Cut Exit Loops w / 100 Ft. Lead

BD Loops PreFormed Saw-Cut Exit Loops w / 100 Ft. Lead

Quick Facts:
  • Compatible with gate openers sold on GateCrafters
  • For installation in asphalt or concrete 3/16 saw-cut groove
  • Custom designed polyethylene wedge shaped jacket with wings. (built in backer-rod)
  • Pre-phased at the factory
  • Loop wire jacket and lead-in jacket are the same size
  • Pre tested at factory 3 ways
  • 100 feet of lead


$126.00
BD Loops Loop Goop for Exit Loops

BD Loops Loop Goop for Exit Loops

Quick Facts:
  • Sold in Sets of 2
  • Seals up saw cuts in your driveway


$59.98


BD Loops Exit Loop Saw Blade

Quick Facts:
  • Use on a 7 or 7 ¼ Circular Saw (5/8"-7/8" Arbor)
  • 3/16th Wide


$99.99
BD Loops Loop Goop for Exit Loops (Set of 12)

BD Loops Loop Goop for Exit Loops (Set of 12)

Quick Facts:
  • Sold by the case (12- 30oz tubes)
  • Seals up saw cuts in your driveway


$359.90


BD Loops Exit Loop Saw Blade (14" Blade)

Quick Facts:
  • Use on a 14 Concrete Saw (3/4"-71" Arbor)
  • 3/16th Wide


$224.99
BD Loops Safety or Exit Loop E-Z Detector Checker

BD Loops Safety or Exit Loop E-Z Detector Checker

Quick Facts:
  • Checks Safety & Exit Loops Functionality
  • Compact Design
  • Green Light/Red Light Indicators
  • No Battery Replacement Needed


$156.00
Miller Safety Edge Gate Bumper- 5 ft (GB0101-5)

Miller Safety Edge Gate Bumper- 5 ft (GB0101-5)

Quick Facts:
  • Provides flexible cushion to leading or trailing edge of a 2" gate frame
  • Easily attaches to gate with screws


$59.99
Miller Safety Edge Gate Bumper- 6 ft (GB0101-6)

Miller Safety Edge Gate Bumper- 6 ft (GB0101-6)

Quick Facts:
  • Provides flexible cushion to leading or trailing edge of a 2" gate frame
  • Easily attaches to gate with screws


$79.99
Miller Safety Sensing Edge 5 feet (MGS20B2U5)

Miller Safety Sensing Edge 5 feet (MGS20B2U5)

Quick Facts:
  • Added gate safety - when touched, edge sensors signal gate opener to stop and reverse.
  • Easy installation on standard 2" square gate frames
  • 3-sided activation


$199.00
NIR-50 Safety Photo-eye reflector hood cover (Reflector-O-HD)

NIR-50 Safety Photo-eye reflector hood cover (Reflector-O-HD)

Quick Facts:
  • Reflects the safety beam back to the receiver/transmitter unit
  • For EMX NIR-50 photo eyes


$24.99


NIR-50 Safety Photo-eye Hood Cover (NIR-HD)

Quick Facts:
  • Reflects the safety beam back to the receiver/transmitter unit
  • For EMX NIR-50 photo eyes.


$17.95
SOS Siren Safety Sensor (SOS-YDT)

SOS Siren Safety Sensor (SOS-YDT)

Quick Facts:
  • Compatible with all gate openers
  • Opens gate for emergency vehicles
  • Works by detecting decibal levels
  • Nation's most widely used Uniform Emergency Gate Access


$375.00


Fire Access Box Red for Safety

Quick Facts:
  • Two models - Micro Switch or Knox Lock Cutout
  • Post Mount
  • Heavy metal, powder coated
  • Bright red color


$85.63
BD Loops PreFormed Saw-Cut Safety Loops w / 20 Ft. Lead

BD Loops PreFormed Saw-Cut Safety Loops w / 20 Ft. Lead

Quick Facts:
  • Compatible with gate openers sold on GateCrafters
  • For installation in asphalt or concrete 3/16 saw-cut groove
  • Custom designed polyethylene wedge shaped jacket with wings. (built in backer-rod)
  • Pre-phased at the factory
  • Loop wire jacket and lead-in jacket are the same size
  • Pre tested at factory 3 ways
  • 20 feet of lead


$86.00
US Automatic Sentry Photo Eye Send and Receive Safety Kit (12/24 vdc)

US Automatic Sentry Photo Eye Send and Receive Safety Kit (12/24 vdc)

Quick Facts:
  • Includes Receiver and Transmitter units
  • Max distance of 50 feet
  • Prevents gate from closing on vehicle


$80.04


US Automatic Photo Eye Safety Sensors

Quick Facts:
  • Includes Receiver and Transmitter units
  • Max distance of 50 feet
  • Prevents gate from closing on vehicle


$62.10
GTO/Linear Pro Safety Photo Beams (R4222) 12V, Non-Contact System

GTO/Linear Pro Safety Photo Beams (R4222) 12V, Non-Contact System

Quick Facts:
  • 30' Range between sender and receiver
  • 12 volt design
  • LEDS for alignment and troubleshooting
  • Pulsed infrared dual beams
  • Universal mounting to any solid surface


$77.81
Miller Edge Safety Edge Wireless Activator (MWRT02)

Miller Edge Safety Edge Wireless Activator (MWRT02)

Quick Facts:
  • Wireless option for edge sensors
  • Used for sliding gates
  • Easy to install


  • $129.00
    Nice Apollo Safety Photocells

    Nice Apollo Safety Photocells

    Quick Facts:
    • Utilize the latest photocell technology
    • Blue Bus communication systems
    • Compatibility: works with 936 and 1050 Control Boards.


    $69.12


    Pair of safety photo eye mounting posts

    Quick Facts
    • Compatible with all photo eyes
    • Solid black to blend with any gate or landscaping theme
    • Available in 2 optional heights: Car (30" tall) or Truck (36" tall).
    • Comes with cap


    $54.95