|
The NIR-50-325 Retroreflective Photoeye can be used as a reversing sensor for any assortment of gates. Its benefits include an extended range for improved performance in rain and snow. It has NC and 10k monitoring. A compact design that allows for easier mounting. A lower current draw that makes it superb for solar and low voltage applications. It comes in a weatherproof casing and is also UL325-2016 compliant for safety devices.
These features make the EMX NIR-50-325 the perfect photoeye for any gate setup.
-Estimated Radio Range: 0.5 ft (0.1 m) to 50 ft (15.2 m)
-Power Supply: 12…30VDC, 24…30VAC @ 60 Hz
-Protection class (IP): CE, UL325-2018
-Relay range: Up to 50 ft.
-Operating Temperature (°C Min/Max): -4° to 131°F (-20° to 55°C)
-Dimensions: L-1.3” (33mm) x W-0.8” (21mm) x H-2.6” (66mm)
-Weight: 0.2 lbs (91g)
-Warranty: “EMX Industries, Inc. products have a warranty against defects in materials and workmanship for a period of two years from date of sale to our customer.”
**Compatible with many operators such as: Patriot, Sentry, and Apollo gate openers.
|
GateCrafters.com offers more expert assistance than anyone.
If you need help deciding if this gate opener has the abilities that are right for your gate we have live application specialists available 9am - 9 pm EST 7 days a week or try our exclusive gate opener recommendation tool 24 hours/day.
EMX NIR-50-325 Safety Photoeye
EMX Industries is a manufacturer leading the industry in a wide range of sensor and control applications. Their access control and detection devices are equipped with technologies that sense general motion such as objects, vehicles, and people. Made in the USA, solutions from EMX are engineered and manufactured in Cleveland, Ohio. Participating in the DASMA committee on UL325 specifications, this trusted source stays focused on safety by adhering to their quality control system which promises only the highest quality and performance from their products.
The EMX NIR-50-325 is the upgraded version of the NIR-50. This model is the perfect installation to remain within compliance of UL 325 standards for automatic operation systems. This feature is the major difference between this new upgraded model and the previous version. Classified as an external entrapment device, this retro-reflective photoeye is used as a type B1 non contact sensor for safety and protection. UL325 requires continuous monitoring of all safety devices that are to be connected to a gate or door opener. Class I and II gate openers must have a safety audio alarm functioning properly at all times to protect any object in the activation area of the sensor.
The NIR-50-325 photoeye is an accessory part for a gate system that is configured for normally closed systems. It is meant to be installed alongside a new or already existing gate system. A red LED indicator provides assistance to technicians when aligning the photo eye with the reflector during installation. A yellow LED is used as the signal stability indicator between the sensors. Once the photoeye is installed, the reflective technology directs an infrared beam to the reflector and back to the photoeye again communicating any obstruction in range with a response time of 10ms. UL325 requires continuous monitoring of all safety devices that are to be connected to a gate or door opener. Each gate application requires its own unique monitoring method and it is advised to read the instruction manual from the manufacturer for your particular application. This retro-reflective photoeye equipped with extended range of 50 ft. and was designed to be used with gate operators, overhead garage doors, and other parking barriers.
Made from strong, rigid ABS plastics the enclosure provides complete structural integrity from resistance and force. With an environmental protection rating of IP66 this code indicates how tight the mechanical housing is against water and dust. This ingress protection rating indicates the sealing effectiveness which was designed to be effective against various weather conditions. EXM manufacturer warranty protects from defects and workmanship for up to 2 years of purchase.
|
-UL325 -2018 complaint
-Flexible voltage: 12-30 VDC, 24-30 VAC
-Watertight package for reliable outdoor installation
-Operating range: 50 feet
-Lead wire: 6 feet
-2 LED indicators
-Sensitivity adjustment
-Compact size: 2.5″ high, 1.5″ deep, 0.75″ wide
|
|
GateCrafters.com has the resources you need.
How do you use your gate opener system once you get it? GateCrafters.com is the only retailer to give a real answer to this question.
We have develop videos for installing many of our gate openers and products and write DIY focused manuals for most gate openers and have individual instructions for each accessory to be installed with each gate opener.
|
Operating range: 0.5ft (0.1m) …50ft (15.2m)
Sensitivity adjustment: Potentiometer
Signal stability indicator: Yellow LED
Alignment indicator: Red LED
Relay output: Form C contacts (NO, COM, NC), 30VAC/VDC, 2A
Resistive termination: 10k Ohm (internal)
Response time: 10ms
Power: 12…30VDC, 24…30VAC @ 60 Hz
Current draw: 83mA
Relay output: Form C contacts (NO, COM, NC), 30VAC/VDC, 2A
Operating temperature: -4°…131°F (-20°…55°C)
Environmental protection: IP 66 IEC
Dimensions (L x W x H): 1.3” (33mm) x 0.8” (21mm) x 2.6” (66mm)
Weight: 0.2 lbs (91g)
Connections: 5 wires, 6.5’ (2m) cable
Certifications: CE, UL325-2018
|
Included with single photo eye
(1) Retro-reflective photoeye (NIR-50-325)
(1) Plastic reflector- 3” (Reflector-O)
(1) Bracket w/ mounting hardware
Included with complete kit w/ 1 photo eye
(1) Retro-reflective photoeye (NIR-50-325)
(1) Steel protective hood for photoeye (NIR-HD)
(1) Plastic reflector-3” (Reflector-O)
(1) Plastic hood for reflector (Reflector-O-HD)
(1) 1 Bracket w/ mounting hardware
|
|
GateCrafters.com is the DIY factor.
GateCrafters.com further adds to most of our gate openers for easier DIY installation.
We have developed exclusive components (example: easy adjustable mounting brackets), customized instructions, and offer a full spectrum of accessories to truly cover all aspects of the installation of your gate opener.
In addition we have the largest staff of factory trained technicians in the US.
|
|
The following tools and supplies are suggested in the manufacturer manual for optimal installation. They are not provided by GateCrafters, however, most tools
are available at local hardware stores for purchase or rental.
Please refer to manual for Tools Needed.
Depending on the type of gate, power supply and contributing environmental factors additional tools or supplies may be needed. Please review the product manual associated with this gate opener model for further details.
|
|
Words from Senior Application Engineer, Anthony Geato
|
Top of Page
|
GateCrafters.com has actual experience.
We have a testing area, we have factory and internal training courses, we build gates and have our own gates that are automated, we attended all industry trade shows in multiple countries and are a member of the AFA, and we pay visits to our chosen manufacturers' factories.
All these factors are what have lead to us having so many exclusive additions.
When you see and actually use as many products as we have you tend to have many ideas for minor changes that have major impacts. We acted on these ideas and have utilized them to help thousands of customers automate their gates.
Manual: Instruction Manual
Manual: Spec Sheet
QB ID: NIR-50-325
|