The Security Brands Ridge 2.0 Wireless Keypad and Transceiver can be installed anywhere and have no wires - perfect for any small or complex system you have! The Ridge 2.0 Keypad and Transceiver from Security Brands is the latest in wireless technology with a receptive 433 MHz two-way connection, no digging to install wires, and several security measures - such as the "3 Strikes, You're Out" feature. This security feature with the Ridge 2.0 Wireless Keypad and Transceiver was designed to keep unwarranted visitors out if they type in a code incorrect more than 3 times in sequence. After the 3 incorrect codes, the Ridge 2.0 Wireless Keypad and Transceiver will sound a 30 second alarm and then proceed to shut down for a total of 90 seconds. ("3 Strikes, You're Out" Set Up is located in the Ridge 2.0 Quick Start Guide.)
Star Key (*)– Deletes the entry if a mistake is made. Press the (*) to start over.
Pound Key (#)– Designed only for exiting the Programming Mode.
Reset Procedures– If the (1) Master Code is lost, or the device needs a factory reset - both instruction for each procedure (Master Reset & Unit Reset) are accessible in the Quick Start Guide.
Sub Mode (1)– Create Access Codes to Channel A.
Sub Mode (2)– Delete One Single Code or Multiple Codes.
Sub Mode (3)– Change the Master Code.
Sub Mode (4)– Set-Up "3 Strikes, You're Out" Security Feature.
Sub Mode (5)– Include Latch Code.
Sub Mode (6)– Set up a Relay Output Time.
Sub Mode (7)– Create Access Codes to Channel B.
Sub Mode (8)– Create (1) Single-Use Code.
Sub Mode (9)– Set Up a Keypad ID.
Sub Mode (0)– Delete All Codes.
Note: All detailed instructions on setting up codes are located in the Ridge 2.0 Quick Start Guide.