8 ft x 3 in x 3 in Mounting Post with Hinges



Price: $212.50
In Stock
Quantity:


bookmark this pageSave this page

Chat with a live representative or Send us an email

1-800-537-4283
This 8'x3"x3" Mounting Post is compatible with a single gate setup. Installation requires setting the post approximately 2' deep into the ground, so the height will be about 6' after installation. The Mounting Post can be used in conjunction with all Gate Crafters gates and gate openers, and can accommodate both pull-to-open and push-to-open setups, as well as gates that hinge on either the left or the right.

Many gateposts do not accommodate the installation of the post-mounting brackets in a way that the mandatory setback is achieved. The Mounting Post allows for addition placement options for the post-mounting bracket.

The post comes finished in flat black with a top post cap. Other colors are available for an additional fee; call GateCrafters.com sales at 1-800-537-GATE for more information about additional painting options.

The posts are made of 11 gauge steel (wall 1/8" thick) that has been galvanized and optionally powder coated. If you order these with a powder-coated gate, then your posts will automatically come powder coated. If you order separately, you have the option to add powder coating.

Steel that has been galvanized has many advantages. First, it is the most cost-effective, environmentally friendly option. Galvanization is one of the least expensive coating options available and powder coating is the most environmentally friendly. With both coatings, you are saving money in the long run and maintaining the green standard that GateCrafters.com is known for.

Having posts that are galvanized and powder coated also ensures that your posts are at their peak strength and able to offer weather-resistant protection for years to come. Galvanized steel is one of the strongest steels on the market and can last for up to 25 years (longer in rural areas).

Requiring little maintenance, galvanized steel can withstand construction damage and all kinds of weather conditions while protecting every inch of your posts. The additional powder coating only strengthens the durability of the steel and adds to its aesthetic value.


QB ID: 3 X 3 Post - H

   Dynmaic FAQ
What are the advantages of DC over AC?
With a DC opener you don’t need an electrician to install it, is it safer because it is low voltage, and power is more readily available through everyday outlets.
What is the range of use for the automatic driveway gate opening transmitters?

The range of use for the automatic driveway gate opener transmitters would vary for each automatic driveway gate opener installation; varying on model installed and external factors. 

The Estate Swing automatic driveway gate openers generally have a range of approximately 300 feet for the automatic driveway gate opener transmitters that comes with each system. .

The published range for GTO and Lift Master radio controls is 50-100 feet, and must be used in line-of-sight of the gate for safety purposes.

The Apollo automatic driveway gate openers generally have a range of approximately 300 feet for the automatic driveway gate opener transmitters that comes with each system (when bought from GateCrafters.com).

How should I run my wire to my automatic gate lock?
It runs from your control panel. What we suggest is running it along a vertical bar on the gate. You can use zip ties to hold it to the back, matching the color of the zip ties to that of your gate.
Which automatic driveway gate opener to use with a wood gate?

Privacy fences usually don't work well with swing automatic driveway gate openers because the solid surface acts as a "sail" in the wind. 

This adds strain to the motor of the automatic driveway gate opener and generally trips safety sensors that are a part of all automatic driveway gate opener systems. Either you can use an automatic slide driveway gate opener or you would have to manually operate a swing driveway gate opener in windy conditions. It would also be recommended to use an automatic driveway gate lock to lock your driveway gate shut in the closed position. This takes pressure off of the automatic driveway gate opener’s arm when the wind pushes against the driveway gate.

The easiest automatic driveway gate opener to manually operate would be the Estate Swing E-S 1600/1602 automatic driveway gate opener. The Estate Swing E-S 1600/1602 automatic driveway gate opener has a key release on the top that releases the gears and allows the driveway gate to be moved manually without having to remove the automatic driveway gate opener.

   Reviews
Top of Page